L-shaped stainless steel power plant hook nail L-shaped nail boiler body flue welding anchor nail
Product Description
L-shaped anchor bolt, shaped like the letter "L", is a fastener specifically designed to connect concrete foundations and other structural components. It is usually made of high-strength steel and can withstand large tensile and shear forces. The L-shaped design enables it to better adapt to different construction requirements during installation and helps enhance the connection strength between equipment or structures and foundations.
In industrial boilers, insulation hooks and nails are widely used for the installation of insulation layers on the outer wall of the furnace body. By evenly distributing insulation hooks and nails on the surface of the furnace, heat loss can be effectively reduced and the operating efficiency of the boiler can be improved. Practice has shown that the use of high-quality insulation hooks and nails can increase boiler thermal efficiency by about 5-8% and significantly reduce operating costs.
Operation Process
The operation process mainly includes three steps: preparation, installation, and inspection. Firstly, before construction, it is necessary to check whether the specifications of the hook nails meet the requirements and ensure that the surface of the boiler is clean and free of debris. Secondly, during installation, the spacing between hooks and nails should be determined according to the design requirements, and special tools should be used to firmly weld the hooks and nails to the surface of the boiler. Finally, after installation, it is necessary to check the firmness and arrangement of the hook nails to ensure they meet the standards. In terms of safe operation, construction personnel need to wear protective gloves and goggles to avoid welding sparks and burns. Attention should be paid to ventilation during welding to prevent the accumulation of harmful gases. In addition, safety belts must be fastened during high-altitude operations to ensure construction safety.
technical Parameters
|
Color
|
Silver
|
|
Finish
|
Bright(Uncoated)
|
|
System of Measurement
|
INCH
|
|
Place of Origin
|
China
|
|
Material
|
Steel
|
|
Diameter
|
Customers' Demands
|
|
Capacity
|
Strong
|
|
Product name
|
refractory anchor
|
FAQ
Q1 : How can you control your quality?
A1 : For each production processing, We have complete QC system for the chemical
composition and Physical properties. After production, all the goods will be tested, and
the quality certificate will be shipped along with goods.
Q2: Are you a manufacture or trader?
A2: We are truly a manufacturer, we not only can provide the high quality products with the
best price, but also can offer the best pre-sale service and after-service.
Q3 : Do you provide free samples?
A3 : Of course, free samples are available.
Q4 : What is your lead time?
A4 : It usually needs about 15- 20 days after receiving the PO.
Q5 : Can we visit your company?
A5 : Yes, for sure, you are welcome to visit company and our products.
Also, we can talk more about the technique details if you need.
Q6 : What is the warranty of your products?
A6 : Our products have at least 1 year warranty,if any quality problems,
we will take responsibility of the cost of the shipment and the replacement.
Q7: What's the MOQ of trial order?
A7 : No limit, we can offer the best suggestions and solutions according to your condition.
Q8: Why choose us?
A8: We had been in this line for more than 25 years, we can not only provide you high
quality products with competitive price, but also we can supply good technique service
which can help you solve problems.
Product Tags:
|
|
Factory Direct Sale L Type Customized Anchor Bolt Shaped Bolt L Type Anchor Bolt Images
|
